Connection and operation, Performance guide – Atlona AT DVI40SRS User Manual
Page 6
5
www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
CONNECTION AND OPERATION
1. Connect the mini-transmitter to your DVI source (PC).
2. Connect the receiver to the remote DVI monitor.
3. Make sure the Cat-5/5e/6 cable is tightly connected and not loose.
4. Enjoy your high quality PC video on the screen.
5. If you see flickering or blinking image on the display, please adjust the rotary control switch to improve the
cable skew. 0 stands for the strongest DVI signal level for longest possible transmission length while 7 stands
for the weakest DVI signal level for short transmission length. Please adjust the signal level from 7 to 0 and
stop turning the rotary switch whenever the video is playing normally. Inappropriate signal level setting may
cause overpowering issue that would shorten the product life significantly!
DVI PC
DVI Monitor
Cat-5/5e/6 Cable
Transmitter
Receiver
PERFORMANCE GUIDE
Performance rating
Type of category cable
Wiring
Shielding
CAT5
CAT5e
CAT6
Solid
Unshielded (UTP)
***
****
*****
Shielded (STP)
***
***
****
Stranded
Unshielded (UTP)
*
**
**
Shielded (STP)
*
*
**
Termination
Please use EIA/TIA-568-B termination (T568B) at any time