Atlona AT DRC444 User Manual
Page 8
www.atlona.com | toll free:
1-877-536-3976
For International: 1-
408-962-0515
8
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership
record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware
updates.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-
ranty rights.
To register go to
www.atlona.com/registration
1. Image Ghosting is usually related to the low quality cables or extremely long length. Please try replacing
cables with extenders or better quality cables.
2. If user is not able to connect to the DCR444 via RS232, this may be related to either incorrect COM port be-
ing used or incorrect wiring on the serial cable. Please use the supplied RS232.
3. Interference on the output signal is usually caused by long cables or if switcher is not grounded. Please
rack-mount the switcher and make sure that the rack is grounded properly.
TROUBLESHOOTING