Atlona AT HD510VGA - Manual (Page 4)

PANEL DESCRIPTION
1. Connect the D-Sub (15-pin) VGA port to local PC/Component monitor.
2. VGA input: connect VGA input to the VGA/Component output port of your source equipment.
3. Audio Input: Connect the PC 3.5mm phone jack input port to the analog audio output port of your source
equipment.
4. TOSLink (optical fiber) Input: Connect the optical input port to the digital audio output port of your source
equipment.
5. Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.
1. HDMI Output: Connect the HDMI output port to the HDMI input port of your display such like HDTV.
2. TOSLink (optical fiber) Output: Connect the optical output port to the digital audio input port of your amplifier.
3. Audio Output: Connect the PC 3.5mm phone jack output port to the analog audio input port of your
equipment.
4. Menu Button: Press the MENU button to bring up OSD opera tion menu.
(See section “6. OSD Operation” for reference.)
5. +/- ButtonV:
D7KHPLQXV ± EXWWRQZLOODXWRDGMXVWWKHSLFWXUH
E2QWKHILUVWWLHURI26'PHQXXVHDQG±EXWWRQVWRPRYHXSGRZQWKHKLJKOLJKWLWHPIRUVHOHFWLRQ
F2QFHWKHGHVLUHGRSWLRQLVVHOHFWHGXVHDQG±EXWWRQVWRWRJJOHEHWZHHQVHWWLQJYDOXHV
1. Front Panel
2. Rear Panel
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4