Atlona AT HD120 User Manual
Page 5
VCR
HDTV Display
HDMI
cable
Composite
Video cable
Camcorder
1. Connect the output of a composite video source such as a VCR, DVD or camcorder to the video
(BNC) input of the AT-HD120
2. Connect an HDMI cable from the AT-HD120 output to the input of an HD display
3. Connect the supplied power supply to the AT-HD120 and into an A/C wall receptacle
4. If connected to a computer monitor select PC mode from the dip switch on the AT-HD120. If con-
nected to an HDTV or projector select HD mode.
5. Pressing the resolution button repeatedly will cycle through all available resolutions. If power to the
device is lost the resolution selection will be retained in memory.
CONNECTION AND OPERATION
DVD Player
or
or
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5