Installation, Ab c – Audio Solutions FM3260 User Manual
Page 8
8
SteP 5
NOTE: Angle adjustment should be done by at least two people.
•
(A) Locate the two hex head bolts used to secure the TV bracket to the wall mount. These bolts can
be loosened and the TV rotated up to 3 degrees clockwise or counter-clockwise. Have another person
hold the television in place while you adjust these screws.
•
(B) While another person is holding the television assembly, loosen the two screws on either side
of the mounting plate and tilt the television up to 15 degrees forward. Tighten the screws when the
desired angle is achieved.
•
(C) With assistance, adjust the main cantilever bracket to move the television out from the wall and
angle up to 90 degrees either left or right. Pay attention to wiring to ensure cables are not damaged
during angle adjustment. See Figure 6.
A
B
C
Figure 6 - Adjust Angle
INStAllAtION