BIXOLON SRP-770II - Manual (Page 14)

Rev. 1.19 - 14 -
SRP-770II/770IIE
3-5 Test printing
3-5-1 Printing using Windows driver
1) Install the Windows driver.
Refer to the
“Windows driver manual” in the CD for the installation procedure.
2) Set the
“port” of Windows driver to the appropriate interface to be used. Refer to the
“Ethernet interface user’s manual” in the CD when using Ethernet interface.
3) Print the test page using the
“Print test page” function of Windows driver.
3-5-2 Printing using label design program
- Label design program is sold separately, and contained in the CD.
1) Install the label design program.
2) Configure the interface by referring to the
“Label craft manual” in the CD.
3) Print the test page after designing a label.