BIXOLON STP-131 - Manual (Page 19)

Rev. 1.06 - 19 -
STP-131
7. Specification
Printing method
Thermal line printing
Dot density 180 X 180 dpi (7dots/mm)
Printing width 72 mm
Paper width 80 mm
Characters per line
(default) 42 (Font A) (12 x 24)
56 (Font B) (
9 x 24)
Printing speed
23 lines/sec
75 mm/sec
Receive Buffer Size 15K Bytes
※ NOTE
Printing speed may be slower, depending on the data transmission speed and the
combination of control commands.
SMPS Input voltage 100~240 VAC
Frequency 50/60 Hz Supply voltage
SMPS Output voltage 24 VDC
Temperature
0 ~ 45℃(Operating)
-20 ~ 60℃(Storage)
Environmental
conditions
Humidity
10~80%RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
Mechanism
Head 30,000,000 lines
100 Km
LIFE*
Auto Cutter 1,000,000 Cuts
Paper thickness : 0.062 ~ 0.075mm
Roll size : : Ø83 mm
Paper
Roll spool diameter
- Inside : Ø12mm (0.47")
- Outside : Ø18mm (0.71")