Brennenstuhl Eco-Line extension socket energy meter EM 235 5-way white 1,5m H05VV-F 3G1.5 - Manual (Page 29)

29 GB
Operation
connected to the main power supply or if the attached electrical device is no longer
plugged in:
- Maximum power consumption (see “maximum power consumption”)
- Energy consumption (see “measure energy consumption”)
- CO2-emissions (see “display CO2-emissions”)
- Total energy costs (see “display total energy costs energy consumption”)
- Total time (see “display total costs [for] energy consumption”)
- Energy costs electricity tariff 1 and 2 (see “display costs electricity tariff 1”
“display energy costs electricity tariff 2”)
q
Measuring Power Factor
i Press the FUNC-Button 3 until the AMP and POWER FACTOR indicators
appear in the LC-display 2 .
i The LC-display 2 will now show in amperes the power output required by the
electrical devices connected. Additionally, the LC-display 2 indicates the power
factor.
q
Measure Power Consumption
i Press the FUNC-Button 3 until the WATT and POWER FACTOR indicators
appear in the LC-Display 2 .
i The LC-display 2 now shows in watts the current output consumed by the electrical
devices connected. Additionally, the LC-display 2 indicates the power factor.
q
Display Maximum Power Consumption
i
Press the FUNC-Button 3 until the indicators WATT, MAX and POWER FAC-
TOR appear in the LC-display 2 .
i The LC-display 2 now shows in watts the maximum power consumption that was
measured to date with the energy cost metering device. Additionally, the LC-dis-
play
2 shows the date and time at which the maximum power consumption was
registered.
i
The LC-display 2 also shows the power factor.
Steckdosenleiste_Content_DE_GB_NL_SE_ES.indd 29 23.07.14 13:23