CEJN Work Safely Onboard Ships - Manual (Page 15)

I ALWAYS CHECK THAT THE NIPPLE IS COMPLETELY CONNECTED TO THE COUPLING
I ALWAYS MAKE SURE THE ALERT-RING IS NOT VISIBLE (NEW 2014)
I NEVER EXCCED THE PRESSURE VALUES SPECIFIED FOR MY HOSE ASSEMBLY.
I REFER TO THE PRESSURE RATE AS INDICATED ON THE FERRULES ON THE HOSE
ASSEMBLIES
I NEVER EXCEED THE MINIMUM BENDING RADIUS SPECIFIED FOR THE PARTICULAR
HOSE TYPE
I NEVER CONNECT OR DISCONNECT COUPLING AND NIPPLE UNDER PRESSURE
DUE TO THE PRESSURE LOAD IT IS NOT POSSIBLE TO OPERATE THE LOCKING SLEEVE
OF THE COUPLING
I DO NOT USE ANY TOOLS TO RELEASE THE NIPPLE FROM THE COUPLING
I ALWAYS COMPLY WITH WORKING CONDITIONS OF HOSE ASSEMBLIES, INCLUDING
COUPLING/NIPPLES
High-pressure hydraulics are a powerful media and you
need to take all necessary steps to avoid any risks to safety.
15