Channel Master Digital Advantage 100 (2020) - Manual (Page 9)

7
“S” Clamp
75 Ohm Coaxial Cable
Spade Lugs
(Connect to VHF Terminals on TV Set)
Wire Lugs (Connect to UHF
Terminals on TV Set)
Balun
75 OHM SEPARATOR
*For older TV sets only
E. AIMING TOWARD A TRANSMITTING STATION
Once the antenna installation is completed, turn your
TV set on and have an assistant observe the reception.
On the roof, Ioosen the U-bolt nuts and turn the
antenna until you get the best reception. Once this is
accomplished, tighten U-bolts nuts securely,
NOTE: If broadcast stations are in different directions,
you will need an antenna rotator.
This will allow you to rotate the antenna and pinpoint
individual stations from inside your home. (For more
information on rotators, visit www.channelmaster.com.)
Find the installation you plan to make on the following
pages.
**READ THE INSTRUCTIONS FOR ASSEMBLING THE
ANTENNA AND THE INSTALLATION BEFORE YOU START THE
ACTUAL WORK!**
Visit your local retailer or our website for available
mounts and accessories you’ll need for your installation.