Channel Master SMARTenna (3000HD) - Manual (Page 12)

SMART enna ™
10
4. Attach the antenna to the mast using the two U-bolts
and four butterfly nuts provided ( Fig. 7).
Figure 7
5. Run coaxial cable between the TV set location and
the CM3000HD antenna and attach F connectors to
both ends of the cable.
6. Attach the connector on the antenna end of the
cable to the CM3000HD.
7. Attach the connector on the TV set end of the cable
to the TV set or Set Top Box/DVR ( Fig. 8).
Figure 8
8. Adjust the position of the antenna as necessary to get
the strongest signals (see Operating Instructions below).
9. Installation is now complete.
Operating Instructions:
For best reception, please consider the following
conditions: