Compix Analog - Manual (Page 10)

Document No: 2.3.008 Revision: 1.0 Updated: 5/8/2012
2. Under the Color Control Section, adjust the incoming video’s
color to match that of the Compix graphics. To adjust properly,
use the [75% Colorbars] or other patterns located in the Pat-
terns menu. The Color Control will only adjust the incoming
video, not the Compix graphics. Use the Key Bands and Key
Adjust for testing the Key and Video relationship within the
switcher.
Note: If the SC-Phase, H-Sync, or V-Sync does not work, the
switcher is auto-adjusting the incoming Compix graphics and
timing itself. If this is the case, there should be no need for
adjustment.
3. After the above is completed, click [U-Save] to save the
settings, then click [OK]. The Compix system is now ready for
immediate use.