CP Electronics MWS3A-PRM-LV - Manual

Overview
Features
Back features
Ceiling Microwave presence/absence detector 12-24V AC/DC
MWS3A-PRM-LV
Product Guide
Microwave Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
Power Input & Output Connector
Used to connect power to the unit and to connect a
switched load.
Switch Input Connector
Two input terminals can be used to manually override the
lights on or off.
Walk Test LED active when movement is detected
Valid setting received
Retaining Spring
Retaining Spring
Power Input &
Output
Connector
Switch Input
Connector
Front features
The MWS3A-PRM-LV Microwave presence detector
provides automatic control of low voltage loads including
lighting and BMS systems with optional manual control. The
MWS3A-PRM detects movement using a highly sensitive
microwave detector. This works by emitting low power
microwave signals and measuring the reflections as the
signals bounce off moving objects.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty. Optional settings allow lights to be turned off in
response to ambient daylight.
The MWS3A-PRM has a unique adjustable sensor head
that allows the area of detection to be optimised for the
application.
All functionality is fully programmable using an IR handset.
MWS3A-PRM-LV
Ceiling Microwave presence/absence detector 12
-24V AC/DC
MWS3A-PRM-LV-GOLD
Ceiling Microwave presence/absence detector 12
-24V AC/DC for low current
MWS3A-PRM-LV-OC
Ceiling Microwave presence/absence detector 12
-24V AC/DC and open collector output
Sensor Lens
which covers...
Microwave Sensor
IR Receiver
Light Level Sensor
Status LEDs
Mounting Bezel