CP Electronics MWS5 - Manual (Page 6)

6
Wiring diagrams - standard power supply
Wire the products as shown in the diagrams. All switches are optional, however the dimming variants can have two
switch configurations. If used with Option A, a single momentary switch can be used for absence detection and dimming
up/down—set switch mode 1 position switch together (see page 10). If used with Option B, a centre biased momentary
switch gives the benefit of having separate switches to dim up and down—set switch mode 2 position switch together in
this case.
MWS5-PRM - non-dimming
MWS5-DD, MWS5-AD Dimming - switch Option A
MWS5-DD, MWS5-AD Dimming - switch Option B