d&b Vi - Manual (Page 8)

2.1.1. Z5387.000 Vi Mounting frame top
Intended use
The Z5387.000 Vi Mounting frame top is designed to support
arrays with a maximum weight of up to 136 kg (300 lb), which
corresponds to flown configurations of 4 x Vi-TOP or 2 x Vi-SUB
cabinets.
Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
The Z5387.000 Vi Mounting frame top is equipped and supplied
with the following rigging components.
Note: In delivered condition, the Rear/Splay links [3A/B]
are not attached to the frame. For assembly instructions please
refer to Þ Chapter 2.4. "Rear/Splay links of the frames"
Þ Attaching the Splay/Rear links and the O-ring on page
15.
Pos. Component Description
[1] Z5387.000
Vi Mounting frame top
Weight (including all rigging components): 11.1 kg (24.5 lb).
[2] Fixing points The Mounting frame is equipped with four fixing points for suspension using shackles.
[3] Rear link Rear link including Fixing bolt [3a] and Ring cotter [3b].
In connection with the Front links of the Vi loudspeaker cabinets, the Rear link of the frame is
used to attach the frame to the first cabinet of an array.
[4] 2t Shackle Three 2t shackle are provided for hoisting purposes.
d&b Vi Rigging manual (1.2 EN) 8