Datapath VSN450 - Manual (Page 5)

Unpacking
Your packing box should contain the following items:
• The VSN450 Chassis
• ASUS Z87-WS Motherboard (installed)
• Mouse
• Keyboard
• Cables and Adapters (See Quantity guide Fig. 1)
• Software Installation Suite CD.
This CD contains all of the software required for the VSN450, including the drivers for the
capture cards and the Wall Control application software.
• Motherboard Driver CD and documentation (VSN450 only)
If there are any discrepancies, you should contact Datapath immediately.
5
Cables and Adapters - Quantity Guide
Fig.1
C1 x2 per VisionRGB-E2S card. x1 per VisionRGB-E1S and VisionSD4+1 card
C2 x1 per VisionRGB-E1S/E2S card. x1 per VisionSD4+1 card
C3 x1 per VisionRGB-E1S/E2S card. x1 per VisionSD4+1 card
C4 x2 per VisionHD4 card
C5 x1 per VisionSD8 and x1 per VisionSD4+1 card
C6 x1 for the ATX Power supply, x2 for the RPSU