Drylam Fujipla PLS3311 - Manual (Page 48)

AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3>
5-14. ADJUST PAPER POSITIONING
The position of the paper in the feeding tray is decided based on the center point marked on the tray.
1
If the positioning is not good, figure out the amount and direction you want to adjust.
2
Adjust the amount and direction of the feeder tray by using the Feed Adjustment Knob.
NOTE
• In order to avoid cutting error, film must be more than 0.16” smaller than paper at both
sides.