Future Automation PL - Manual (Page 8)

In
st
al
la
ti
o
n
:
S
ta
ge
3
Page 7 of 20 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PL - Plasma Lift
Fixng the Lift in the Cabinet
With the base properly located, use
the 8 pointed screws supplied, 4 on
each side, to pin the mechanism in
place, fixing its position left and
right. These 8 screws should be
screwed through the middle hole of
each of the clusters of 3, shown.
With the lift fixed in position, use 8
wood screws on each side to secure
the lift to the cabinet.
Place the mechanism within the cabinet.
Raise the beam to the top and carfully guide
the base through the opening in the top.