Future Automation ET - Manual (Page 7)

In
st
all
at
io
n
: S
ta
ge
3
Page 6 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
ET / ET60 - Electric Tilt Mechanism
Fixing to the wall
After you have measured the screen positioning on the wall mark where the first fixing will go.
With the bracket hanging by the one fixing, make sure that the bracket is square and level by
using a spirit level. Once square, mark the other holes and fix accordingly.
Always use appropriate fixing types. Suitability of wall fixings will depend on the type of wall
the product is to be fixed to. If unsure, please seek instruction from your supply dealer.