Holland Electronics HPH860 - Manual (Page 2)

Specifications
2
Description
The HPH-860 is a frequency agile, microprocessor
controlled, heterodyne signal processor which uses
the latest low noise, PLL, SAW filter and AGC
techniques to provide superior quality and
performance at an attractive low price. The HPH-860
has been specifically designed to produce the highest
quality pictures at extremely low inputs while
maintaining stable output levels with its sync tip AGC circuit. High input capability and SAW filtering provide
the unit with the ability to process a single cable
channel even in the presence of adjacent channels.
High frequency and extremely high accuracy Phase
Locked Loop oscillators allow the unit to meet the
frequency offset and stability requirements of FCC
Docket 21006.
MODEL HPH-860 POWER CARRIER
AGILE PROCESSOR
AURAL
CHANNEL
CHANNEL LEVEL SELECT
CH.TYPE STORE IN/OUT F+ F-
OUTPUT
30dB
POINT
TEST
Features
• Microprocessor controlled
• High output : 60 dBmV, 57 dBmV minimum
• SAW filtered
• Spurious outputs down >-60 dB
• Adjacent channel rejection of -60 dB
• Superior low noise circuitry
• Sync tip AGC for precise signal requlation
• BTSC stereo compatible
• 45.75 MHz IF loop-thru
• Output capability to 860 MHz
• Five year limited warranty
Specifications
Input Frequency Range:
54 to 806 MHz
Input Channels: CATV channels 2 to 125
Off-air channels 2 to 69
Output Frequency Range:
54 to 860 MHz
Output Channels:
CATV channels 2 to 94, 95-99, 100-135
Output Level:
57 dBmV min.
Input Range: 0-30dBmV typ.
Output Level Adjust Range:
48 to 60 dBmV
Aural Carrier Adjust Range:
12 dB min.
Noise Figure:
8 dB VHF, 10 dB UHF
Spurious Outputs:
In-band >-57 dB min, -60dB typ.
Fv–1.5 MHz >-50 dB
Out of Band > -57dB min, -60dB typ.
Video Flatness: ± 1.7 dB
IF Output:
35
± 2 dBmV @45.75 ±. .005 MHz
Controls:
Aural Carrier and Output Level
Weight: 7.9 lbs.
Size: 19˝ L × 1
3
/
4
˝ H × 10˝ D
Power Requirements:
90 - 260 VAC, 60 Hz
.