ILUMINARC Ilumipod™ 7 IP - Manual (Page 2)

Ilumipod 7 IP Optic WW QRG
2
About this
Guide
The Ilumipod 7 IP Optic WW Quick Reference Guide (QRG) contains the
product’s connection and mounting information.
Disclaimer
This QRG does not replace the product’s user manual. You must download
the corresponding user manual from the ILUMINARC® website
(www.iluminarc.com) to learn about the disclaimers, safety notes,
programming modes, and technical information.
Safety Notes • DO NOT open this fixture unless instructed. It contains no
user-serviceable parts.
•
DO NOT look at the light source when this fixture is on.
•
DO NOT touch the fixture when it is operating because it may be hot.
•
DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
•
DO NOT mount this fixture overhead without using a safety cable.
•
DO NOT submerge this product to a depth of more than 1 m and/or for
longer than 30 minutes (IP67 rating). Regular outdoor operation is fine.
•
DO NOT operate this fixture if you see damage on the housing, lenses,
or cables; have the damaged parts replaced by an authorized technician
at once.
•
DO NOT connect this fixture to a dimmer or rheostat.
•
ONLY connect this fixture to a grounded and protected circuit.
What Is
Included
• One Ilumipod 7 IP Optic WW
• One Mounting Plate
• One Mounting Spike
• One Warranty Card
• One Quick Reference Guide
Features
• High-power 1 W (350 mA) LEDs
• Cast aluminum, IP67, black housing
• Stainless steel, IP67 gland nuts
• Impact-resistant glass lens cover
Ordering • 18° lenses
Order Number: 01630442