Mounting, Ac power, Power wiring – ILUMINARC Ilumipod™ 7 IP User Manual
Page 3
Ilumipod 7 IP Optic WW QRG
3
Mounting
Before mounting this product, read the safety notes at the beginning of the
Ilumipod 7 IP Optic WW User Manual and follow the mounting procedures
indicated in it.
This product comes with a plate to mount it on any firm, non-flammable
surface, whether horizontally or vertically, on the floor or overhead. The
articulated arm that connects the light to the base is adjustable and it can
swivel, thus providing full angle control.
A spike is included for mounting this product on soil (gardens and large
flowerpots).
Mounting Diagram
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Wiring
You can connect the bare-ended IP67-rated power cable from the fixture to
an IP67 junction box, as shown below. Make sure to use IP67-rated conduit
to link the junction boxes.
AC Power Junction
Box Wiring
Floor Mount
Overhead Mount