Iflex 2400, Technical specifications inputs, Outputs – Ivie iFlex 2400 Series User Manual
Page 6: Control ports, Control network, Mainframe
iFlex 2400
Technical Specifications
Inputs:
Up to 24 Analog: electronically balanced on
Phoenix/Combicon removable screw connectors
Mic Inputs:
Nominal gain +20dB
Electronically switchable between
+20dB and +40dB
Input impedance 2kOhm
CMRR:
>75dB at 1KHz
Equiv. Input Noise (EIN): <-125dBu typ with 150 Ohms source
Phantom power:
48V nominal, selectable per input
Line Inputs:
Nominal gain -20dB,
Input impedance 20k Ohm
Max input level:
+20dBu
Outputs:
Up to 24 Analog; electronically balanced on
Phoenix/Combicon removable screw connectors.
Maximum Output Level:
+19dBu
Frequency Response:
20Hz to 20KHz (+/-1dBdB)
THD:
<0.01% (20Hz to 20KHz, +10dBu
output)
Dynamic Range:
100dB typ. (22Hz to 22KHz unweighted)
Crosstalk:
<-75dB
Control Ports:
12 inputs and outputs
Control Input Voltage:
0 to 10v
Control Input Impedance: 10kOhms
Logic Output:
Open Collector, 100mA sink
Control Network:
Connectors:
RJ45 Ethernet connector , USB 2.0
Panel LED Indicators:
IO Card Type, Signal Present (per IO), Gate Status
Mainframe:
Connector:
Standard IEC
Mains Voltage:
85-270V AC, 50/60Hz
Power Consumption:
<75VA