Junger Audio b42 - Dynamics Processor - Manual (Page 14)

2. FUNCTION DESCRIPTION
page 2-8 operation manual b40, chapter 2 -Function description-
The audio signal delay through the dynamics processor is approx.
2ms due to delaying of the audio signal using internal memory. A
small delay is deliberately introduced to the audio signal in order to
allow limiter and compressor algorithms which can 'preview' the
audio signal before changing it. That is the signal curve can be
changed before maximum level is reached. This delay must be
considered before attempting to mix signals processed by the
dynamics processor with other undelayed signals.
When mixing together a delayed signal and a direct signal there may
be cancellation of the signal waveform at some frequencies and re-
inforcement of the waveform at other frequencies (comb filter effect).
Corresponding 2ms delay of direct signals should therefore be
carried out before mixing them with delayed processed signals.
2.4.2
INFLUENCE OF
SIGNAL DELAY
TIME