Knox Video RS16x16HB User Manual
Page 11
KNOX VIDEO
RS16x16HB ROUTING SWITCHER
KNOX VIDEO
RS16x16HB ROUTING SWITCHER
Switch position 3 chooses between the verbose and nonverbose mode of operation
(see section 2.7). Position 3 ON is verbose, while position 3 OFF is nonverbose.
Switch position 4 is used to lock out the front panel keypad for security reasons.
Position 4 OFF allows keypad entry, while position 4 ON locks out keypad entry.
Switch position 5 is used to disable breakaway audio. Position 5 OFF allows
breakaway audio, while position 5 ON causes audio to always switch with video.
Switch positions 6 through 8 are reserved for programming options not covered
here. Switches 6 through 8 should always be OFF.
Switches are ON when pushed up.
The switches are read by the microprocessor only at power-up; for switch
configuration changes to take effect, cycle the power input to the RS16x16HB.
1
ON
2
3
4
5
6
7
8
Figure 4.1 Baud Rate Setting
Page 17