Neotech Communications GEC-48CHP-R - Manual (Page 4)

GEC-48CHP-R / GEC-416CHP-R
Receiver of 8/16-port Ethernet Extender over Coax with PoC + 4-port 10/100/1000TX Ethernet Switch
4 V1.0
IEC60320-C14 AC Power Socket
Cable Connection
Interface Type Support Description Cable Type
RJ45
10Base-TX
100Base-TX
1000Base-T
Category 3 or above cable
Category 5 or above cable
Category 5 or above cable
BNC (Female) Ethernet over Coax Data RG-59/U or similar
Power
AC power interface with 100~240 V AC
input
AC Power Socket
LED Status
Label Colour State Indication
PWR Green
Steady Power on
Off Power off
ACT Green
Flashing Data transfer within the coaxial cable
Off No data transfer within the coaxial cable
READY Green
Steady The converter is ready for data transfer
Off The converter is not ready
PoC 1-8
(ET4200CPp-RS
8) PoC 1-16
(ET4200CPp-RS
16)
Green
Flashing Detection stage
ON: 1 sec,
OFF: 5 sec
(Repeat)
Un-connected or broken coaxial cable
ON: 2 sec
OFF: 4 sec
(Repeat)
TX is connected with power adaptor (PoC not required)
ON: 3 sec
OFF: 3 sec
(Repeat)
Overload
ON Power over Coax in use
Ethernet
100M Green
Steady Ethernet connection of 10/100Base-TX is established
Flashing Transmitting or receiving Ethernet data
Off
Neither valid Ethernet connection established nor transmitting or
receiving Ethernet data
1000M Yellow
Steady Ethernet connection of 10/100/1000Base-T is established
Flashing Transmitting or receiving Ethernet data
Off
Neither valid Ethernet connection established nor transmitting or
receiving Ethernet data