NEXCOM NISE 2100 User Manual
Page 57
Advertising
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
44
Chapter 3: System Setup
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual
Installing a SATA Hard Drive (NISE 2110/2110A)
1. With the bottom side of the chassis facing up, remove the mounting
screws of the bottom cover and then remove the cover.
Bottom
cover
Mounting
screw
2. Remove the 4 mounting screws that secure the drive bay to the chassis
and then remove the drive bay.
Drive bay
Mounting
screw
Advertising
This manual is related to the following products: