Security save & exit, Security, Save & exit – NEXCOM NISE 2200 User Manual

Page 106

Advertising
background image

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.

92

NISE 2200 User Manual

Chapter 4: BIOS Setup

Security

Save & Exit

Advanced

Chipset

Boot

Security

Main

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Set Administrator Password

Password Description

If ONLY the Administrator’s password is set,

then this only limits access to Setup and is

only asked for when entering Setup.

If ONLY the User’s password is set, then this

is a power on password and must be entered to

boot or enter Setup. In Setup the User Will

have Administrator rights.

The password length must be

in the following range:

Minimum length

3

Maximum length

20

Administrator Password

User Password

Administrator Password
Select this to reconfigure the administrator’s password.

User Password
Select this to reconfigure the user’s password.

Save & Exit

Advanced

Chipset

Boot

Security

Main

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Exit systm setup after

saving the changes.

Save Changes and Exit

Discard Changes and Exit

Save Changes and Reset

Discard Changes and Reset

Save Options

Save Changes

Discard Changes

Restore Defaults

Save as User Defaults

Restore User Defaults

Boot Override

SATA PM: Hitachi HTE545016B9A

Launch EFI Shell from filesystem device

Save & Exit

Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press
<Enter>. A dialog box will appear. Confirm by selecting Yes. You can also
press <F4> to save and exit Setup.

Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting. You
can also press <ESC> to exit without saving the changes.

Advertising
This manual is related to the following products: