NEXCOM VTC 6200 User Manual
Page 58
Advertising
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
45
VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 3: System Setup
3. Insert the Bluetooth module’s cable connector into the USB header.
Push the module down then secure it with a mounting screw.
Bluetooth
module
Cable
connector
Mounting
screw
4. Attach one end of the RF cable onto the module.
Attach RF
cable to the
module
5. Mount the other end of the cable to the Bluetooth mounting hole
located at the front panel of the chassis.
Advertising
This manual is related to the following products: