Installing dimm memory modules – NEXCOM NSA 3150 User Manual
Page 43
Advertising
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
29
NSA 3150 User Manual
Chapter 3: System Setup
Installing DIMM Memory Modules
1. Locate the DIMM sockets on the board.
2. Release the locks on the DIMM sockets.
3. Insert the module into the socket at an 90 degree angle. Apply firm even
pressure to each end of the module until it slips into the socket.
4. While pushing the DIMM into the position, the lock will close automatically.
Advertising