One Systems U Bracket - Manual

1
On Point Audio U-Bracket Installation Guide
May 2014
On Point Audio offers a variety of U-brackets for use with its loudspeaker systems. U-brackets provide an easy
way to achieve a vertical or horizontal wall mounting, or a ceiling parallel mount for loudspeaker systems.
NOTE: ALL On Point Audio U-brackets are for indoor use only! DO NOT USE IN OUTDOOR OR DIRECT
WEATHER APPLICATIONS!
The following On Point Audio models may be mounted using a U-bracket:
OPA-8NP
OPA-28NP
OPA-10 Active
OPA-12
OPA-15NP
OPA-15YNP
WARNING: Please read and understand all portions of the “Rigging and Suspension of On Point Audio
Products” article:
http://www.onpointaudio.com/pdf/RIGGINGANDSUSPENSIONOFONPOINTAUDIOPRODUCTS.pdf
WARNING: All local and national codes must be observed when suspending this product. Consult a
professional rigging specialist and structural engineer experienced in suspension of these types of products.
Consult a professional rigger familiar with the appropriate local and national codes.
WARNING: All mating surfaces (i.e. walls, ceiling, etc) must be capable of supporting the U-bracket and
loudspeaker weight, and associated safety factors as required by local and national codes.
WARNING: Do not substitute the specific U-bracket. Do not use the specific U-bracket on any enclosure
except for the enclosure specified. Do not suspend the enclosure with any U-bracket except for the specified
U-bracket.
WARNING: All associated rigging is the responsibility of others.