OT Systems ET1100CPp series - Manual (Page 4)

ET1100CPp Series
Industrial 10/100Base-TX Ethernet over Coaxial Converter with PoE+ & PoC
V1.3 4
LEDs
The LED indicators give you instant feedback on status of the EoC Transmitter & Receiver:
LEDs Colour State Indication
PWR Green
Steady Power on, PWR stands for POWER
Off Power off
COAX
DATA
Link(TX) Green
Steady The transmitter and receiver communicate and lock with each others.
Off The transmitter and receiver do not communicate or the coaxial cable is disconnected.
ACT Green
Flashing Data transfer within the coaxial cable
Off No data transfer within the coaxial cable
READY
(RX)
Green
Steady The converter is ready for data transfer
Off The converter is not ready
PoC (RX) Green
Flashing Detection stage
ON: 1 sec,
OFF: 5 sec
(Repeat)
Un-connected or broken coaxial cable
ON: 2 sec
OFF: 4 sec
(Repeat)
TX is connected with power adaptor (PoC not required)
ON: 3 sec
OFF: 3 sec
(Repeat)
Overload
ON Power over Coax in use
PoE (TX) Green
Steady Power is applied to the Power Device (PD)
Off A non-PoE device is connected or Ethernet connection is not established
Ethernet
LINK/ACT Green
Steady A valid Ethernet connection established
Flashing Transmitting or receiving Ethernet data, Act stands for ACTIVITY
Off Neither valid Ethernet connection established nor transmitting/receiving Ethernet data
SPD Yellow
Steady Ethernet Connection transferring at 100Mbps
Off Ethernet Connection transferring at 10Mbps
Functional Description
 PoE+(30W) and Power over Coaxial
 802.3af/802.3at Compliant
 Data Rate up to:90Mbps (Downlink), 90Mbps (Uplink)
 Max.Distance:1km over Coaxial cable (RG-59/U)
 Compatible with 4-port standalone Receiver (ET1200CPp-R4) & Rack Mount 8-port (ET2200CPp-R8) or 16-port
(ET2200CPp-R16) Ethernet over Coax receiver
 Accept 48VDC external power input or PoE power input from RJ45 port
Manual Earth Green manual is available on our website www.ot-systems.com