Piper 3-CM - Manual (Page 2)

INTRODUCTION
Congratulations: You have just purchased one of the finest pieces of equipment on the
market today. Before installing or operating your new Piper Products, Inc. equipment,
you should read through this manual. This manual should be retained for further refer-
ence as it contains installation and operating instructions, service tips, part lists and
warranty information.
For your safety, read and follow all cautions and warnings.
Freight Damage Claims:
Your Piper Products equipment was carefully inspected and packed before leaving our
factory. The transportation company assumes full responsibility for safe delivery of this
equipment. Piper Products cannot assume responsibilities for damage or loss incurred in
transit. Visible damage or loss should be noted on the freight bill and signed by the
person making the delivery.
A freight claim should be filed immediately with the transportation company. If damage
is unnoticed or concealed until equipment is unpacked, notify the transportation
company immediately and tell them you want to file a concealed damage claim. This
must be done within ten (10) days after delivery was made. Be sure to retain all pack-
ing material and cartons.
WARNING
Installation of this equipment should be done only by persons qualified or licensed
to install electrical equipment.
Adjustments and service work should be performed only by a qualified service
technician. Service is available through Authorized Piper Products Parts and
Service Distributors throughout the United States. For a complete listing of these
call or write Piper Products, Inc. for the name of the nearest distributor.
This equipment is intended for commercial use only. Not for household use.
Use of other than genuine Piper Products replacement parts or service work
performed by other than an authorized Piper Products service agent will void the
warranty.
Do not use any corrosive cleaners. Use only cleaners approved for stainless steel.