SENRUN IR-285 - Manual (Page 4)

03
1. Infrared sensor
2. Power indicator: The red light indicator will be flash once when turn it on.
The red light indicator will be solid red when the batteries are almost out of power.
3. 3.5mmØ microphone input jack or mini XLR jack.
4. Volume Control: Adjusted by turning clockwise to the volume adjustment knob.
5. Power switch: Power on / Power off.
6. Buckle is fixed with a screw so that is can conveniently clip on the belt comfortably.
7. Buckle is fixed on the unit. It can set revolved up to 90°by fingers.
8.Battery chamber cover: To put batteries in and take out from this chamber cover.
9.Battery compartment: 1.5V x 2. Align the negative or positive polarities properly
when inserting the batteries. Remove the batteries when not been used for a long
period of time to keep the batteries life longer.
Body-Pack microphones
A) Headset microphone
B) Lavaliere microphone
Options: Headset or Lavaliere microphone.
NOTE ON UNIT OPERATION:
When using lavaliere, try to place capsule close to the mouth while doing, so do not
turn high up the volume as it cannot achieve the best reception.