SENRUN IR-285 - Manual (Page 6)

05
body-pack
transmitter
AC100~240V
(1) An accesory, AC-DC adapter is to be connected to AC outlet.
(2) DC plug of AC-DC adapter is to be connected to DC jack of infrared charger.
●Battery charger input voltage is DC5V. Any other chargers with other
chargers can not be used.
●Be sure to use AC-DC adapter that matches DC5V microphone / body-
pack.
(3) Insert microphone / body-pack into battery charger. Takes about 2.5 hours
until they are fully charged.
CAUTION FOR CHARGING
(1) When charging microphone / body-pack, be sure to switch them off.
(2) When inserting microphone / body-pack into charger, do it vertically with
slow.
Incomplete insertion of microphone / body-pack into charger would not show
LED indicator on, and do it again in this case.
(3) It is advisable for this microphone / body-pack not to use any other vatteries
except nickel hydrogen chargeable batteries attached.
We are not responsible for its breakage, fire or injury, and surroundings to be
polluted.
(4) When LED indicator of MIC-battery capacity turns on in red, try to charge
right away, or it may create sound cutting or voice distortion when voltage
falls down.
(5) Do not put any metal substances, or water into battery charger.