Ep-600 series, Body pack microphone – SENRUN EP-600 User Manual

Page 12

Advertising
background image

1. External antenna jack: 1/4 for antenna input jack.

2. Power indicator: The red light indicator will be flash once when turn it on.

The red light indicator will be solid red when the batteries are almost out of power.

3. 3.5mm

microphone input jack or mini XLR jack.

4. Volume Control: Adjusted by turning clockwise to the volume adjustment knob.

5. Power switch: Power on / Power off.

6. Channel selector from 1 to 16.

7. Buckle is fixed with a screw so that is can conveniently clip on the belt comfortably.

8. Buckle is fixed on the unit. It can set revolved up to 90

by fingers.

9. Battery chamber cover: To put batteries in and take out from this chamber cover.

10. Battery compartment: 1.5V x 2 Align the negative or positive polarities properly when

inserting the batteries. Remove the batteries when not been used for a long period of time to

keep the batteries life longer.

Options: Headset or Lavaliere microphone.

NOTE ON UNIT OPERATION:

When using lavaliere, try to place capsule close to the mouth while doing, so do not turn high up the

volume as it cannot achieve the best reception.

φ

Body Pack Microphone

10

9

9

EP-600 series

Advertising