TEKVOX 71021-Drop-In - Manual (Page 4)

Contact us for additional information or to find an Authorized TEKVOX Dealer in your area.
11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com
1.392in. 1.392in.
1.464in. 1.464in.
0.700in. 0.700in.
1.000in. 1.000in.
2
.3
6
1
in
.
4
.7
6
4
in
.
3
.6
2
1
.7
5
Podium Wedge Installation Template
Wedge part number: 78035
Hole drilling instructions:
1. Place this template on the podium or surface
where you would like to mount the Keypad Wedge.
2. Place the Wedge on top of the template and
visualize its placement.
3. If you are sure of its placement, TAPE the
template to the podium.
4. Drill four 1/16" holes through the template and into
the podiums surface. About ½” deep.
5. Remove the template.
6. Place a provided No. 6,
½” long, phillips head
screw in each of the four holes of the Wedge.
7. Screw to podium.
TOP
(High end of Wedge)
5/8 ”
Hole Size
1/16
”
Hole Size