TEKVOX CB1-A Ceiling Box - Manual (Page 5)

TEK CB1-A Plenum Rated Ceiling Box
5
Product Use
This product is intended for indoor use only. Use of this product outdoors may lead to
product failure and/or serious personal injury.
Do not install near sources of high heat or a structure that is prone to vibration, movement,
or chance of impact.
Description
The TEK CB1-A is designed to be installed into a standard
2’ x 2’ or 2’ x 4’ ceiling tile and
allows for easy installation and service of audiovisual and lighting equipment. Included in
this box are internal electrical power outlets and below-ceiling connections for power, HDMI,
and control. This allows for the use of non-plenum cables to a projector.
TEKVOX supplies this box with system solutions called Drop-Ins. These systems are
preconfigured audiovisual solutions for classrooms and offices. There is no programming
required, and in most cases, installers only need to make the connections for the system to
be up and running.
Features
 Plenum-rated storage solution for non-plenum equipment
 Fits in 2' x 2' or 2' x 4' ceiling tile
 Outer edge dimensions – 23.75” x 14” x 5”
 Provides electrical power for inbox equipment and below-ceiling power for video
projector
 Provides HDMI in-box connection for HDMI receiver and below-ceiling power for video
projector
 Provides in-box TEKVOX TekSecurity for TekMonitor and below-ceiling power for video
projector. Can be easily converted for standard RS-232 connection
 Removable Equipment Tray - Provides unlimited options to secure a variety of A/V and
lighting control equipment within the case
 Optional High Voltage Lighting compartment (110 volts to 277 volts) - Provides secure
space for wiring of lighting control equipment
 High Voltage Main power compartment (110 volts) - Provides secure space for duplex
electrical receptacles inside box and optional exhaust fan. Below the ceiling, it provides
electrical receptacle for video projector, HDMI, and TekSecurity control connections
 Includes the Rize Kwik-Loc Cable Kit for ceiling support
 Perforated Lid - Provides ventilation and access from below the ceiling to equipment.
Individual designs can be requested
 Knockouts - 1” and 3/4” knockouts provide electrical conduit connector access