TEKVOX CB1-A Ceiling Box - Manual (Page 6)

6
Installation
Introduction
Please thoroughly read these instructions before installing this product. Take the time to fully
understand the components and the required tools to safely complete the installation.
Observe warnings and use proper safety equipment and procedures at all times.
Parts list
Main Components
 TEK CB1-A Ceiling Case (Qty. 1)
 Removable Cover (Qty. 1)
 Partition, Electrical outlets, Fan (Optional), (Qty. 1)
 Equipment Tray (Qty. 1)
 Optional High Voltage vertical panel (Qty. 1)
 Optional High Voltage top panel (Qty. 1)
Hardware
 Quick Locks (Qty. 4)
 1/16˝ Braided Cable (Qty. 4 Strands)
 Thread-Forming Screws, Pan Head Phillips, 8-18 Threaded, 1/4" L (Qty. 12)
Make certain that all components are included in this package before starting installation. If
any components are damaged or missing, STOP and call TEKVOX, Inc. at 210.348.6565.
Lid Removal
 Unlatch and swing the lid up.
You many need a wire hook
to pull the lid up, or just tilt
the box.
 Push the lid in towards the
bottom and away from the
metal hinges.
 Angle the lid so that you can
pull it away from the metal
hinge.
 Carefully remove the lid out
from the ceiling box.