Rear panel, Changeable cards, 4i-ds& 4o-ds – TEKVOX MMX88 Matrix Switcher User Manual

Page 9

Advertising
background image

Modular Matrix Switcher 8x8 (with Audio)

4

2.1.2. Rear Panel

Figure 2- 2 Rear Panel of Modular Matrix Switcher 8x8 (with Audio)

No.

Name

Description

INPUTS

Audio input slot

OUTPUTS

Audio output slot

INPUTS

Input signal card slots, 2 in total

OUTPUTS

Output signal card slots, 2 in total

Power
ports

Connect with household alternating current power

RS232

Serial control port; connect with RS232 port of control device.

GND
connector

Used for system grounding

TCP/IP

(Optional) Used for TCP/IP control port

Note: There are only 2 input and 2 output slots for the Modular Matrix Switcher 8x8
(with Audio), which enables only 2 input cards and 2 output cards to be installed on
Modular Matrix Switcher 8x8 (with Audio). The input/output cards can be changed
based on your requests and supports hot plug and play.

2.2. Changeable Cards

The Modular Matrix Switcher 8x8 (with Audio) support expansion through various
changeable input/ output cards of different signals including DVI, HDMI, VGA, twisted
pair, SDI etc. Below is a brief introduction to the changeable cards.

2.2.1. 4I-DS& 4O-DS

Seamless DVI signal card. (Please check the specification from 5.2.1)

This input card is fully compatible with HDMI1.3 and HDCP 1.2, and supports
seamless transmission for high-definition DVI, HDMI, VGA, AV, and YPbPr signals. It
can automatically identify the format of the input signal. The DVI cards support

Advertising
This manual is related to the following products: