Transystem 887 Lite - Manual (Page 10)

Ver 1.0 10
2.2 Getting Started
Please follow the procedure step by step.
Step 1 Charging Your Battery
To charge your 887 Lite GPS Recorder, you have to plug your USB cable
into the power source. Charging time is about 90 minutes and you can
charge from PC/ Laptop USB HOST.
For the 1st time you use 887 Lite, please charge battery until it is full
(the green LED is blinking). Shown as below:
- If the LED is red, that means battery power is critically low. Charge immediately.
- If the LED is green, that means battery is charging now.
- If the battery LED is blinking, that means battery is fully charged.