Transystem 747 A+ - Manual (Page 10)

10
2.2 Getting Started
Please follow the procedure step by step.
Step 1 Charging Your Battery
To charge your 747 A
+
, you have to plug your USB cable into the power
source. Charging time is about 3~4 hours and you can charge from PC/
Notebook’s USB HOST or from cigarette-lighter in car.
For the 1st time you use the 747 A
+
, please charge battery until it is full
(the green LED blinks). The LED that represents the battery is the
right-most battery icon (shown in below).
- If the LED is red, that means battery power is critically low. Charge immediately.
- If the LED is green, that means battery is charging now.
- If the no LED light display, that means battery is fully charged.