TVLogic SWM-170A - Manual (Page 3)

4 Multi Format LCD Monitor Multi Format LCD Monitor 5
1. Caution 1. Caution
●
Always use set voltage.
●
AC 100 ~ 240V (1.6A/50~60Hz)
●
DC 12V
• All operating instructions must be read and
understood before the product is operated.
• These safety and operating instructions
must be kept in safe place for future
reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended
by the manufacturer. Use of inadequate
attachments can result in accidents.
• This product must be operated on a power
source specified on the specification label.
If you are not sure of the type of power
supply used in your home, consult your
dealer or local power company. For units
designed to operate on batteries or another
power source, refer to the operating
instructions.
• The power cords must be routed properly
to prevent people from stepping on them
or objects from resting on them. Check the
cords at the plugs and product.
• Do not overload AC outlets or extension
cords. Overloading can cause fire or electric
shock.
• Never insert an object into the product
through vents or openings. High voltage
flows in the product, and inserting an
object can cause electric shock and/or short
internal parts. For the same reason, do not
spill water or liquid on the product.
• Do not attempt to service the product
yourself. Removing covers can expose
you to high voltage and other dangerous
conditions. Request a qualified service
person to perform servicing.
• If any of the following conditions occurs,
unplug the power cord from the AC outlet,
and request a qualified service person to
perform repairs.
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product
or when objects have fallen into the product.
c. When the product has been exposed to
rain or water.
d. When the product does not operate
properly as described in the operating
instructions. Do not touch the controls
other than those described in the operating
instructions. Improper adjustment of
controls not described in the instructions
can cause damage, which often requires
extensive adjustment work by a qualified
technician.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condition. Any noticeable abnormality
in the product indicates that the product
needs servicing.
• In case the product needs replacement
parts, make sure that the service person
uses replacement parts specified by the
manufacturer, or those with the same
characteristics and performance as the
original parts. Use of unauthorized parts
can result in fire, electric shock and/or other
danger.
• Upon completion of service or repair work,
request the service technician to perform
safety checks to ensure that the product is
in proper operating condition.
• When mounting the product on a wall or
ceiling, be sure to install the product
according to the method recommended by
the manufacturer.
• Unplug the power cord from the AC outlet
before cleaning the product. Use a damp
cloth to clean the product. Do not use liquid
cleaners or aerosol cleaners.
• Unplug the power cord from the AC outlet if
you do not use the product for considerably
long time.
• Do not use the product near water, such as
bathtub, washbasin, kitchen sink and
laundry tub, swimming pool and in a wet
basement.
• Keep the product away from direct rays of
the Sun-light.
• Do not place the product on an unstable
cart, stand, tripod or table. Placing the
product on an unstable base can cause the
product to fall, resulting in serious personal
injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or
table recommended by the manufacturer
or sold with the product. When mounting
the product on a wall, be sure to follow
the manufacturer’s instruction. Use only the
mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a
cart, it must be moved with the utmost
care. Sudden stops, excessive force and
uneven floor surface can cause the product
to fall from the cart.
• The vents and other openings in the cabinet
are designed for ventilation. Do not cover
or block these vents and openings since
insufficient ventilation can cause
overheating and/or shorten the life of the
product. Do not place the product on a bed,
sofa, rug or other similar surface, since they
can block ventilation openings. This
product is not designed for built-in
installation; do not place the product in an
enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the
manufacturer’s instructions are followed.
• The LCD panel used in this product is made
of glass. Therefore, it can break when the
product is dropped or applied with impact.
Be careful not to be injured by broken glass
pieces in case the LCD panel breaks.
• Keep the product away from heat sources
such as radiators, heaters, stoves and
other heat generating products (including
amplifiers).