Zektor Clarity Prowler™ - Manual (Page 13)

Prowler 8x8 User Guide, Version 1.4, 7/15/11 13
Front Panel Commands
Using the Audio/Video Breakaway
The Prowler 8x8 has an audio / video breakaway feature that allows the audio and video signals to be
switched independent of each other.
To switch only the audio channels of a zone (audio breakaway):
1 Press the audio / video breakaway selection button until only the AUD LED is lit.
2 Following the instructions for “Mapping an input to an output zone”. When only the AUD LED
is lit, only the audio channels will change when mapping an input to an output zone.
To switch only the video channels of a zone (video breakaway):
1 Press the audio / video breakaway selection button until only the VID LED .
2 Following the instructions for “Mapping an input to an output zone”. When only the VID LED
is lit, only the video channels will change when mapping an input to an output zone.
To switch both the audio and video channels of a zone (normal operation):
1 Press the audio / video breakaway selection button until the AUD and the VID LED s are lit.
2 Following the instructions for “Mapping an input to an output zone”. When both the AUD and
the BLUE LED s are lit, both the Audio and Video channels will change when mapping an input
to an output zone.
       
AUDIO VIDEO MATRIX SWITCH
AUD
VID
MEM 1 2 3 4
CLR 5 6 7 8 ENT 1 2 3 4 5 6 7 8
A
A
A
A