AGI Security SYS-4HNVR304 Quick Guide - Manual (Page 16)

APPENDIX 3 HARD DISK INSTALLATION
11
APPENDIX 3 HARD DISK INSTALLATION
Note: Here takes a 16CH model as an example of how to connect a hard disk to your device.
Note: It’s necessary to install a hard disk first before firmware upgrade to ensure the upgrade process
works properly.
Step1: Remove the top cover, and find the hard disk connector and bracket in the device.
CR2032
Bracket
Hard Disk
Connector
Bracket
Screws
Step2: Get a compatible hard disk. With the PCB side facing down, insert the hard disk to one of the hard disk
connector.
C R 20
32
H
ar
d
D
isk