AMETEK XG 850 Watt Series Rack-Mount User Manual
Page 8
Advertising
XG 850 Watt Rack Mount Kit Options
8
M370078-05
4. Remove the chassis member from the slides and assemble to the chassis using M5 × 6 mm
pan head screw SST (6X) which are not supplied. See Figure 6.
5. Attach front and rear brackets to cabinet section (see Figure 7) using the following materials
supplied with the slides:
•
(4) #8 × 0.375 Flat Head Countersunk Screws SST
•
(4) #8 Lock Washers
•
(4) #8 Regular Washers
•
(4) #8 Hex Nuts
Figure 5 Modifying rear bracket
Cut, shear or bend off
top and bottom flange
Cut, shear, or bend off top
and bottom flanges
Figure 6 Removing Chassis Member From Slides
Important:
Figure 6 shows the chassis member for slide 375QD-18. The chassis member will be
longer for Jonathan slide 375QD-26/28.
Advertising