Amina ALF80 - Manual (Page 13)

Setup Tips
1 1
When setting up any of the above system
scenarios, it is advised to experiment with
connecting the ALF80 in reverse phase with
respect to the Evolution series speakers.
Often the reverse-phase connection results in
better integration and slightly higher sound
pressure level through “cross-over” region.
Using pink noise can be a good way of
judging the difference between the in-phase
and reverse-phase connections.
To avoid unwanted vibrations, ensure the
ALF80 is fixed securely to a structure or, if
free standing, the supplied rubber feet are
used.
The supplied port cover plate can be used to
improve the appearance of the port when,
for example, the ALF80 is installed behind
plasterboard walls or ceilings. The plate is
supplied with acrylic transfer adhesive
already fitted; use the tab to assist removal of
the liner paper then press the plate firmly
into place. Please refer to the detail view on
page 5.
Alternative finishes can be applied to the
cover plate; for best results use water based
paints and primers.
01
02
03