Amina ALF80 - Manual (Page 5)

Using the Adjustable Port System
03
End Position
This port position is useful when the ALF80 is located behind a kickboard, or underneath a sofa.
Important notes:
ALWAYS loosen the four screws in the port
plate before adjusting the port.
The blanking plate MUST always be screwed
down over the port opening that is not in use.
Be sure to tighten both the port plate and the
blanking plate. Never over-tighten the screws.
Use ONLY the supplied screws to fix the port
and blanking plates.
Contact your dealer if spares are required.
Ensure the rubber o-ring is correctly in
position around the port and sitting within the
circular rebate.
To release the blanking plate from its
position, it may be necessary to push it from
behind from within the cabinet. This can be
done via the other port opening once the
port is removed.
01
02
03
04
05
06
MAX 110mm
DO NOT modify the length of the port by cutting it, or by extending it
using additional tubing, or flexible pipes. Doing so will seriously
compromise the acoustic performance of the product.