Analog Way Digi Scan 1600 - DSV1600 - Manual (Page 18)

SCAN 1600 / DIGI SCAN 1600
PAGE 18
Chapter 4 : UPDATING THE DEVICE
The device can be updated thanks a computer (PC) via its RS-232 communication port.
c Power OFF the device.
d Connect the RS232 connector of the device to the serial port of your computer with a DB9 M/F straight cable.
e Open the file: Scan 1600.exe (in Start > Program > ANALOGWAY > SCAN1600 updater).
f In the Port menu select the Com port connected to the device.
g Click on START on the software.
h Press and hold the ENTER front panel button, and simultaneously power ON the device. The update will start. Then
you can release the ENTER button.
i When the software displays: Program operation completed, click on the Quit button to close the update software.
Your device is now ready to work.
NOTE: The updater files are available on our web site: www.analogway.com