Analog Way Scan Vision VHX II - VHX480 User Manual
Page 11
Advertising
SCAN VISION VHX II
™
Chapter 6 : CONTROL SOFTWARE
PAGE 11
6-3. SOFTWARE SET UP
c Select the Serial port in the Controls menu.
The SCAN VISION VHX II
™
is now connected to the computer.
d In the Image section, do all the needed settings:
-Select an anti-flicker level (1, 2 or 3).
-Select the Standard format and adjust the position and the size to display the image in full screen.
-Then select if needed a zoom mode (Overscan or Zoom) and adjust the position and the size.
Advertising